For the measurement and wiring of signals such as temperature measurements by means of temperature sensors (thermoelectric voltage) or other digital and analog signals, our terminal blocks with electronic components are a smart solution. Depending on the type of sensor, signal or circuit, we offer terminals with integrated resistor, varistor, adjustable potentiometer (poti), diode or blocking diode (diode 1N4007), light-emitting diode (LED for the status indication or status signalling) or also empty housings for individual assembly with your own electronic components.
Measurements of temperature voltages with a thermocouple can be realized via our thermocouple terminal blocks. For this purpose, depending on the type, different variants are available to connect the thermocouple compensating wires. With our component terminal blocks in various connection technologies and the extensive range of accessories, you can master any challenge within your electrical cabinet.
Integrated blocking diodes protect components against reverse currents or resistances. Voltage peaks or overvoltages can thus be effectively counteracted.
Electronic components can be integrated into the different versions of the basic modular terminal block in accordance with the specific application. Numerous, easily accessible contact points allow the components to be soldered in.
The design of the A2T 2.5 EM has the same contours as the standard double-level terminals of the A-series. Accessories such as the end plate can be adopted and potentials can be multiplied via the cross-connection channel.
The multifunctional disconnection areas allow the insertion of fuse holders (SIHA) or component plugs (BEST). In this way, test-disconnect terminal blocks can be converted to fuse terminal blocks or to terminal blocks with electronic components.
Spacer plate has an innovative design with the same shapeof terminal which can meet the space required by thecustomer's own welding components, but also contributeto heat dissipation, thus increase the available current. Thespacer plate is also designed as a detachable structurein the middle, allowing space expansion when largercomponents are installed. Even in the need to jumping withcross-connector can also be free installation.
The thermocouple terminals shown in the measuring circuit are used for the thermoelectric transmission of the thermoelectric voltage from the thermocouple to the reference junction and the indication unit via the compensating wire. Thermocouple terminals are required for constructing a temperature measuring circuit.
On the website Engineering Data you will find an extensive selection of downloads related to CAT data. For the quick integration of our products into your design, a wide range of digital product data is available for engineering systems such as EPLAN (EPLAN Electric P8 and EPLAN Pro Panel), Zuken E3.series, WSCAD and many others. These data allow a precise representation of terminal blocks with electronic components such as double-level diode terminals, terminals with diodes, resistor, varistor, or even for measurements with thermocouple in 3D and show all relevant electrotechnical and operational characteristics.
Do you have questions about our products and services or would you like an individual offer? Simply fill out contact form. Our employees will contact you as soon as possible.
